A Review of the Best Table Saws to Buy in the Market

Best Table SawsTable saws are woodworkers’ most coveted tools. However, shopping for one is the biggest hurdle. There are many types, models, and brands in the market. While this may sound great because of the variety, there are also knock-offs.

So, if you want to get value for your money, you want to read this review of the best table saws in the market.

Perhaps the biggest question is, do you need a table saw? Any woodworker shares the same opinion that a table saw is the engine of a woodshop. You can’t do without its straight and accurate cuts. On top of that, it is faster and more efficient.

Here are the budget picks for the best table saws in 2018.

Image
Weight
Power Source/Motor Powers
Blade Diameter
Maximum Cut Depth at 45° -90°
Check
Price
The Best Table Saws Under $200
Craftsman Evolv
Craftsman Evolv
50 lbsAC/15 Amp10-inch2-1/4 in - 3-1/8 inCheck Price
TRUEPOWER 01-0130
TRUEPOWER 01-0130
20 poundsAC/15 Amps10"2-1/2 in - 3-1/4 inCheck Price
Rockwell BladeRunner X2
Rockwell BladeRunner X2
15 poundsCorded-Electric/5.5 Amp15-3/4" x 17"-Check Price
The Best Table Saws Under $300
Craftsman 21807 Laser Trac
Craftsman 21807 Laser Trac
63.8 poundsCorded-Electric/15 Amps10"2-1/2 in - 1/2 inCheck Price
DEWALT DW745
DEWALT DW745
63.8 poundsCorded-Electric/15 Amps10"2-1/4 in - 3-1/8 inCheck Price
SKIL 3410-02
SKIL 3410-02
67 poundsCorded-Electric/15 Amps10"2-1/2 in - 3-1/2 inCheck Price
The Best Table Saws Under $500
DEWALT DWE7480XA
DEWALT DWE7480XA
48 lbsCorded/15 Amps10"2-1/4 in - 3-1/8 inCheck Price
Hitachi C10RJ
Hitachi C10RJ
96 poundsCorded-Electric/15 Amps10"2-1/4 in - 3-1/8 inCheck Price
Bosch GTS1031
Bosch GTS1031
52 lbsCorded-Electric/15 Amps10"2-1/4 in - 3-1/8 inCheck Price
The Best Table Saws Under $1000
Lackmond Beast BEAST7CKIT
Lackmond Beast BEAST7CKIT
61.4 poundsCorded-Electric/13 Amps7"1-1/4 in - 2-3/8 inCheck Price
Makita 2705
Makita 2705
65.5 lbsAC/DC/15 Amps10"2-1/2 in - 3-5/8 inCheck Price
Bosch 41100-10
Bosch 41100-10
60 poundsCorded-Electric/15 Amps10"2-1/2" - 3-1/8" inCheck Price

The Best Table Saws Under $200

Though it is assumed that table saws are very expensive, there’s always something for that woodworker on a budget. You can get a good benchtop table saw for as little as $100.

One thing to note here is that there is a slight compromise in features. You don’t get the best performance like bigger models. Another thing, most of the saw benches in this price range will be from lesser known brands.

We picked the best of the best for you. Here are our choices for the best table saw under $200.

Craftsman Evolv Table Saw for Simple Projects

Craftsman Evolv
View on Amazon
Evolv is a compact, and portable 10-inch saw bench designed for simple projects like home renovations and backyard projects.

The workspace is very spacious; measuring 25 x 17 inches, the table top is commendable for such a cheap saw bench. Though a light duty saw, it delivers enough power to cut through composite and plywood swiftly and precisely.

But then, don’t expect Evolv to cut through dense wood. Another thing, the motor can’t be run for long hours, so it is not ideal for a production environment too.

However, I am glad that at its price, you get plenty of features. Evolve comes with an easy-to-adjust miter gauge, a carbide blade, anti-kickback safety feature, among others.

However, I wish the warranty would have been a little bit longer; there are many complaints regarding the construction of this Chinese manufactured table saw.

TRUEPOWER 01-0130 Table Saw with Steel Stand

TruePower 10
View on Amazon
This is another saw bench that looks very similar to Evolv only that it has a more robust construction and unrivaled stability. Consequently, it costs more than Evolv so let’s find out if it is worth the extra $50.

This TRUEPOWER table saw features a 10-inch Tungsten-carbide tipped blade. The motor is still a 15 Amp, and just like Evolv, it won’t guarantee long hours of operation without overheating. Regarding the build and construction, this one also has a 25 x 17 inches worktop. Though it may not be spacious enough, this is some considerable space; you get what you pay for.

If you have running projects and you want something that will last longer, I highly recommend TRUEPOWER 01-0130. Otherwise, don’t waste $50 on this one; grab the Evolv!

Rockwell BladeRunner X2 Portable Tabletop Saw

Rockwell BladeRunner X2
View on Amazon
In case you are looking for a blend of affordability and portability, the BladeRunner X2 is a deal to snap. This is among the few reliable table saws under $100.

It is very compact and has a carry handle. If you are a DIY enthusiast with on the go projects, then look no further. Though you may despise it for its compact size, it can be used for rip cutting, cross-cutting, miter cutting and even scroll cutting.

But of course you are using sizeable planks; not a whole MDF board. This is the problem with the BladeRunner.

It can handle small tasks, and that’s why I consider it a specialized table saw.

It can come in handy when you are in jobs that require small cuttings for example:
But again, it sounds like an excellent place to start if you are a woodworking amateur.

The Best Table Saws Under $300

Under this category, you will now start to find more features and versatility. This is not an ordinary woodworking amateur’s table saw. It is bigger in size and can handle more demanding tasks. Others come with a stand and wheels to suit different job site needs.

You will realize that here, most of the features are upgraded as well as new extras on-boarded. It is also in this price range that most top brands will start retailing.

So, what are the best table saws under $300?

Craftsman 21807 Laser Trac with the Laser Trac technology

Craftsman 21807
View on Amazon
If you are looking for a cheap table saw that packs the best features for the money, Craftsman has something for you.

This is a solid entry-level contractor table saw that blends affordability and performance.

The first thing I like about it is the accuracy and precision it offers. It comes with the coveted Laser Trac technology, and a carbide tipped blade for smooth cutting and durability. If your work requires high accuracy, this is a table saw you want to have in your shop.

Another unique feature is the wheels. Besides the firm metal stand, you have the option of pushing it on the wheels, a feature that makes it easily portable. It also comes with a ready dust collection bag, onboard storage, among many other features.

The good thing is that you get all these features at just $300. But the assembly might be a little headache for amateurs.

DEWALT DW745 – Compact Job-Site Table Saw

DEWALT DW745
View on Amazon
If you like the top brands, DEWALT is one of them and here’s an affordable saw bench to look at.

DEWALT DW745 is a ruffed job site table saw that is designed for on the go craftsman. It packs some considerable power to handle medium to semi-heavy duty cutting tasks.

I like the ruggedness; and all steel body as well as a steel roll cage. It gives the saw bench the firmness it requires to ensure you make suits on a robust worktop that’s not shaking or wobbling. But then, I don’t like its accuracy. This is in comparison with Craftsman that delivers high precision and accuracy, apparently because of the Laser Trac technology.

The crosscuts, in particular, are not accurate but looking at the other factors, it is still a great purchase. I am also glad that DEWALT considered dust collection and included a 2.5’’ port.

SKIL 3410-02 Table Saw with Folding Stand

SKIL 3410
View on Amazon
This table saw makes it on our list today courtesy of the high performance 15 Amp motor. While Craftsman and DEWALT have motors that can barely reach 4,000 RPM, SKIL 3410 has a 15 Amp motor that can hit 5,000 RPM.

This means it can cut faster than the two and is best for the daily user. Precision is also on point courtesy of EZ View measuring, but still, there is a lot to be desired, especially for learners.

I also like the fact that it is lightweight making it very portable. But regarding portability, Craftsman takes the crown because of the wheels. This sawbench has a sturdy metal base just like Craftsman but lacks wheels.

On the downside, this table saw doesn’t have a dust collection mechanism and considering it costs over $300. You’d want to think twice if motor power is not your primary concern.

The Best Table Saws Under $500

This category features high-end job site saws with some of the latest features.
Here you get the chance to choose from the top brands; the likes of Makita, Hitachi, and DEWALT. In these job site saws, you will realize that portability is a significant consideration, and that’s why you will find compact designs but still, dominant performance.

DEWALT DWE7480XA Table Saw with Guarding System and Stand

DEWALT DWE7480XA
View on Amazon
One thing I like about DEWALT is the rugged construction of their tools. This job site table saw is no exceptions.

It comes with a metal roll steel cage, so you expect it to last longer than plastic. The stand base is not that bad, but then I think DEWALT could have done better. It is not as strong as you may think so if you have heavy workpieces, there is a little wobbling.

Regarding performance, this is a 15 Amp saw rated at 4800 RPM and equipped with a standard 10’’ blade that tackles all the basic cuts. You will also like the blade adjustment that makes crosscutting a buzz; from 0 to 45 degrees.

The price is a little bit on the higher end, but then this is a sure guarantee of excellent service for five years and above.

Hitachi C10RJ Value for Money

Hitachi C10RJ
View on Amazon
This one is those looking for value for money.

Hitachi C10RJ is among the few job site models that will come with a stand and dual wheels for smooth movement. It is stronger and also comes with a tool accessory like DEWALT.

The bevel ranges from 0 – 45 degrees while the motor is still a 15 Amp just like DEWALT and all the other similar models. However, Hitachi is a bit cheaper so does it compromise something? No, in fact, this one has better performance than DEWALT.

Hitachi comes with a longer 35’’ rip fence compared to DEWALT’s 24’’ rip fence. The 35’’ rip is to the right, and on the left, there is another 22’’ fence.

For all cutting needs, cross cuts, rip cuts and even dado cuts, Hitachi C10RJ will be a great work mate.

Bosch GTS1031 The Best Performance and Portable Design

Bosch GTS1031
View on Amazon
It is not always easy to achieve the best performance and maintain a minimalistic design. However, here’s a great table saw that is very portable and puts forward some outstanding performance, Bosch GTS1031.

It comes with a foldable design compact body and is far much stable than your average top saw. It weighs around 50 lbs and comes with a very ergonomic and comfortable handle.

The performance is excellent, courtesy of a 15 Amp motor that is by far the best output. It does a cool 5000 RPM so, with the 24T carbide tooth, cutting is a buzz.

The Best Table Saws Under $1000

We have finally come to the high-end models. In this segment, you will find the best in class features combined with durability. Top brands dominate here, but then, that doesn’t mean all the expensive table saws are the best.

You still have to choose your product wisely. Here are our top 3 picks.

Lackmond Beast BEAST7CKIT Portable Jobsite Cutting Tool

Lackmond Beast BEAST7CKIT
View on Amazon
As the name suggests, this is a real beast; both in size and performance. It has the largest working area of all the table saws we have reviewed. But then, it hasn’t compromised the compact design you expect in a job site saw.

The trick here is that there are detachable extensions for expanding the working area.

The performance of this table saw is out of this world. It offers the largest cutting capacity in its class, and though it has a 7 ‘’ blade, the cutting performance is that of a 10’’.

But then, this saw is very expensive, and at $700, you must be a real DIY or woodworking enthusiast to buy this one.

Heavy duty performance is not synonymous with this model so a professional wouldn’t need it. Its cutting versatility is the charm; you can use it to cut all the standard cuts as well as special design cuts.

Makita 2705 Contractor Table Saw

Makita 2705
View on Amazon
Makita has always been on the frontline for saw safety and today, that earns them a spot in this review.

I like Makita 2705 because of the safety features. It comes with two anti-kickback pawls and a riveting knife. This is very commendable considering all the other models have one pawl and may be a riveting knife.

The 32T carbide tipped blade, and 15 Amp 4800 RPM motor will guarantee the best in class cutting.

But one problem is on dust collection. I’m afraid there is no dirt collection mechanism so if you handle large projects with heavy cutting needs, find a way to control the dirt. In as much as you don’t mind dirt on the floor, the motor, and as you know, dirt is a motor’s number one enemy.

Bosch 41100-10 Worksite Table Saw

Bosch 41100
View on Amazon
This is the best job site table saw for use on hard terrain. It comes with a compact and clever collapsible design that unfolds into a robust four-point base.

The large composite wheels, in particular, give it better traction so you can cut wool without any shaking or wobbling.

Regarding performance, this is a 10’’ saw as usual and has a slightly lower RPM, 3650 to be precise. But still, with the right blade, it can cut wood swiftly without any problem. The challenge is when you want deeper cuts; it is slower and tends to burn.

But one advantage of this motor is that it lasts; the higher the RPM, the higher the tear. Another thing, it is quieter so if your projects are near environments that require zero distraction, this is a top choice.

BUYING GUIDE: ALL YOU NEED TO KNOW ABOUT TABLE SAWS

The market is fast evolving and the table saws we have suggested today may not be the best tomorrow. That said, it would be best if you learn the art of shopping.

Whether you are buying a table saw today, tomorrow, or next month, it’s vital that you know the ABCDs of table saws. That will be our business in this section; telling all that customers need to know when buying table saws.

What is a table saw?
Perhaps the right place to start this review is to understand what a table saw is and its essence in woodworking. A table saw, also known as a saw bench is a wood cutting equipment that features a circular blade driven by a motor. The blade is mounted on the arbor protruding through the tabletop surface.

So, what is the function of a table saw? Table saws are used for a range of cutting needs. Like earlier said, they are used because of their precision and efficiency. Some of the cuts you can get with a table saw include rip cuts, cross cuts, and dado cuts.

But what’s the difference between this saw and a miter saw?

Miter saw vs. Table saw

Both table saws are used for cutting, but miter saws are used for more precise cutting. That’s their primary role and use whereas a table saw will have several functions.

The Anatomy of a Table Saw

What are the main parts of a table saw? If you ask any Tom, Dick, or Harry, a table saw is a table and a saw. But then it is not as simple as that. There are different parts in a table saw, each with a specific function.
So, what are these parts and what do they do?

Tabletop – It usually is in three parts with the primary component mounted on the center part. Typically, portable table saws have aluminum or plastic table tops to make sure they retain their lightweight design.

On the other hand, stationary saw benches have iron table tops to handle the heavy-duty tasks. But the most important thing about a table top is its threshold; it needs to be smooth and dead flat. You also need a table top that has enough room to work without any pressure.

Luckily, some advanced table saws come with further extensions that can be detached to offer more working space.

Base -This is the lower part of the table saw that houses all the other parts including the table top. Table saw bases vary a lot; there are those with stands while others are enclosed.

Perhaps the most important thing about the base is its sturdiness. You want a secure and stable working table top so go for the heavy duty materials. But then, all this will depend on your needs. If you are looking for something portable, a detachable stand on a base stand with wheels will be the best.

On the other hand, for quiet operation and easy dust collection, a cabinet saw is the best. But if you have a workbench, you don’t have to mind a lot about the base.

Fence – As the name suggests, this is a piece that keeps the wood being ripped in line with the blade. This is a fundamental feature as it sets the base at which the cut is calculated. A good fence must be solidly constructed to withstand the vibrations and keep the workpiece in the right place.

It should also allow for easy adjustment, both horizontally and vertically. But then, the most important thing to look out for is the length. A longer rip fence is more effective than a short one as it will wholly grab the wood being cut. So, if your work entails rip cutting, this is a feature you want to be very keen on.

Miter gauge – This is a moon-shaped measuring tool that features a pivoting angle guide to enable you to make accurate crosscuts with ease.

Miter gauges allow from cross-cutting at any angles between -45 degrees and 45 degrees. But some accessories may further improve its capabilities to 90 degrees.

Saw blade – This is an integral part of the table saw and is the cutting part of the saw. Table saws use circular blades which are in a variety of types depending on the desired cut types.

Typically, table saw blades have a 10’’ diameter though you may still find smaller ones and even larger blades up to 30’’ for heavy cutting.

Motor – This is the engine of the table saw and is responsible for rotating the blade to bring about the cutting effect. As we are going to see, later on, we have different kinds of motors and so is the motor configuration.

Height adjustment levers (Trunnions) – Trunnions are levers on the side of a table saw; blade and angle adjustment levers. This is the wheel that will adjust the height of the blade and consequently, the depth of the cut.

There is also the blade angle adjustment lever. This one adjusts the angle at which the blade cuts the workpiece.

Blade Guard – This feature has been designed to keep your fingers away from the blade. But unfortunately, it is a rarely used feature because of the obstruction when changing the blade. It also hinders accuracy, so most woodworkers often do without it.

But the good thing we have plexiglass blade guards, also known as modular guard systems that are clear so you can see what you are doing quite clearly.

Anti-kickback pawl – If you are familiar with chainsaws, you understand the problem of kickbacks and the damage it can cause. For table saw woodworkers, this is also a risk but thanks to a simple technique, kickbacks are greatly reduced. Most table saws nowadays come with an anti-kickback pawl.

This is a special extension that allows the cutting blade to freely move forward with the teeth ready to dig into the material to stop backward movement of wood planks towards the operator.

Make sure you buy a table saw that comes with this feature.
You obviously don’t want to end up as statistics, among the 100,000 plus kickback injuries that are reported in the US annually.

On / Off Switch – This enables the operator to put off the table saw easily without going to the mains. A good table saw must have a switch for emergency as well as convenience. But then, not just any other switch is a good switch.
Look for a large switch that has been designed in a way that you can’t switch it accidentally.

Dust shroud/port – These two are dust collection mechanisms and are located under the table top on the base. Small table saws will feature dust bags that collect the dirt while job site, contractor and cabinet saws have dust ports for use with external dust collectors.

Sensors – When it comes to chainsaws, we have seen a range of chain braking technologies. But none of them beats SawStop. This is a revolutionary technology available in SawStop table saws that senses human skin and stops the saw from cutting. The action is very fast and takes maybe five milliseconds to stop the blade.

But how exactly does this technology work?

As you are all aware, the human body is a conductor while wood isn’t. The blade has a small electric charge typically, so when a conductor comes in the picture, the sudden change activates SawStop. In a nutshell, when the blade detects a conductor, SawStop goes off. Upon activation, the brake gets into the way of the blade and stops it almost instantly. But then, the brake and blade may need to be replaced. However, this is better than losing a finger. As a word of caution, SawStop will not shield you from injuries 100%. Remember SawStop stops the blade almost instantly, not instantly.

Types of Table Saws

Just like many power tools, you will find a variety of types when shopping for table saws. You will find several approaches to the classification of saw benches.

However, the most conclusive one is identifying them by their size and portability. That said, we have two main types of table saws; portable table saws, and stationary table saws. Under these two main categories, you will now find the familiar names.

Portable Table Saws

Portable saws are designed for use by woodworkers with on the go projects. This is because they are relatively lighter so you can shift the workstation easily. If you think this is the type you are looking for, there are three options available; compact, bench top, and job site saws.

Benchtop saws
Benchtop saws are very simple in design but will still get the job done. They are also the most affordable type now that they can do some basic cutting. If you are an amateur, this is a good saw type to go with. Bench tops are called portable saws because of the lightweight design. They don’t have wheels or any other features that contribute to portability. The worktop is very small, so they can’t handle large cutting projects.

Compact table saws
If you want something more advanced than a benchtop saw, this is your area of search. Compact saw benches feature the same simple design like bench tops but are larger and stronger. In fact, some come with cast iron table tops to withstand tougher work environments. But the most noteworthy feature is the larger working top. You can handle medium duty projects on compact table saws easily on these saws than in bench tops.

Jobsite saws
These are professional grade compact table saws and are sometimes called contractors saws. They feature bigger, heavy duty designs and have all the standard features you’d expect in a table saw. The performance is also better with larger fences and more accurate miter gauges.

Regarding power, they pack direct drive motors but at least with more power output. But remember, in as much as they may be called contractor saws, they are not true contractor saws. They have been crowned so because contractors love the portability and contractor-like performance.

Stationary saws

These saws are huge and are often used for larger wood cutting projects. As the name suggests, they are not easily portable because of the bulkiness; some go up to 600 lbs.

But still, there are others that you can mount them on mobile bases. If you want the best performance, you will get it right here. But then, these tables are very expensive, but for justified reasons.
There are three options available when looking for a table saw; contractor, hybrid, and cabinet saw.

Contractor saws
These are the true contractor saws and feature heavy duty parts for heavy duty production. Contractor saws have remained a favorite in the market because of the extra powerful performance. In as much as they are not portable, they offer better performance than job site saws. That said, it’s common to find them in woodshops.

Hybrid saws
Though not a popular term, hybrid saws is a term that has been used to describe saws that feature inboard belt-drive motors. That’s the main difference between hybrid saws and contractor saws. Regarding size, hybrid saws are somewhat in the middle, between contractor saws and cabinet saws.

Cabinet saws
If you go into a large scale woodwork production line, you are likely to find this type of table saw. Cabinet saws are the most expensive but then, for justifiable reasons. They have the best in class features and can handle heavy duty cutting tasks. These saws feature belt drive systems, and besides the powerful performance, the operation is silent.

Table saw motor configuration; direct drive vs. belt drive systems

As far as the motor is concerned, there are two configurations available. We have direct drive and belt drive mechanisms. Each has its pros and cons so when out shopping it would be worthwhile to know the differences.

Direct drive configuration is a set up where the universal motor is linked up to the blade directly. In other words, all the motor power is just transferred to the blade straight. Many of the portable saws have this type of configuration. Direct drive saws are a favorite to many because they pack quite a lot of power in a small form factor.
On the downside, their maintenance requirements are high and so is the operation noise. Some of the favorite direct drive motors include Dewalt DWE7480, Hitachi C10RJ, among others.

On the other hand, belt drive saws feature a belt system and an induction motor. The motor is far away from the blade, so the belt transfers the power to the blade. One advantage of this set up is smoother operation. That makes a belt drive saw the best for cutting dense materials. The operation is also quieter than in direct drive saws. Some of the examples of belt drive table saws include; Shop Fox W1819 and Grizzly G0651.

What about horsepower and voltage?

This is another crucial aspect that you need to be aware of when talking about table saw motors. These are two terms that you must have come across when dealing with power tools.

Horsepower refers to the total output power a motor delivers whereas voltage is the power rating of the motor.

When it comes to horsepower, the higher, the better. The biggest mistake you could be making is choosing lower horsepower than your needs. A table saw with more horsepower will cut through wood faster, with more precision. You will find a range of options to choose from as far as power is concerned.

In the market, you will find 110V motors and 220V motors. So, what’s the difference between the two and is either of them advantageous over the other? Technically speaking, there is no major difference between the two unless you cut wood, from morning to evening, every other day of the year.

I know the technical bits might confuse you more. Here are a few takeaways to help you make a sound decision.

  • A smaller saw will still cut wood but at slower speeds
  • Choose a 3 – 5 HP motor if you intend to use your table saw for daily production
  • Cabinet saws work with 220V outlets
  • Get a hybrid saw to use both 110 V and 220 V

Choosing the right table saw blade

Many woodworkers end up compromising productivity unknowingly by using the wrong blade. If you have never known, there is a special blade for every cutting need.

So, when looking for your next table saw, put into consideration your cutting needs when choosing a blade type.

Here are the major types of saw blades in the market.

Table saw blade materials; steel vs. carbide tipped

The material used to make the table saw itself might not really matter. But then, the blade material does matter. In the market, you will find steel blades and carbide blades.

That said, it is important to know the differences between the two.

The major difference is the price; carbide tipped blades are more expensive than steel blades. So what explains the price difference? One reason you want to buy a Tungsten Carbide blade is that of their excellent cutting precision as well as the ability to retain sharp cutting edges for longer. Carbide can also withstand extreme conditions better than steel.

Flat Top Grind – Abbreviated as FTG, these blades have top edges that are square to the saw plate. They are also known as rakers and offer faster cutting, but then, the cut is not so clean. It actually works the same way a chisel is used. Flat Top Grind blades are designed for use in rip cutting.

Alternate Top Bevel – Abbreviated as ATB, these blades have their teeth angled across the top edge with the teeth facing opposite direction. To make it clear, if the first tooth faces right, the next one will face right. These blades are designed for cross-cutting and the steeper the bevel angle, the cleaner the cut. But one disadvantage of these blades is that they dull faster. So, sharpening is required more often.

Combination (ATBR) – This is an all-purpose blade that has been designed for rip cutting as well as cross-cutting. This is achieved through the combination of ATB and FTG teeth in the sequence. Ordinarily, you will find an ATBR blade with five ATB teeth and five FTG teeth in sequence. So, while FTG teeth do the rip cutting, ATB teeth handle cross-cutting.

Triple-Chip Grind – In this blade type, the alternation is between chamfered and raked teeth. The chamfered teeth will rough out the cut while FTG teeth clean up either end of the kerf. If you saw very dense materials, you should get Triple-Chip Grind blades.

So, what’s the best blade type? Many people keep asking this question, but then, it is a very open question. The conversation should be narrowed down to your cutting needs.

That said, let’s look at the three types of cuts that saw benches can make and the best blade type for each cutting need.

1. Cross cuts – These are cuts made above the grain and require very high precision, and that’s why there is a miter gauge. To put it into simpler terms, this is any cut across the narrower board direction. Here an ATB blade will do you right for its shearing action.
2. Rip cuts – As the name suggests, ripping cuts cut across the board’s length. Here, the fence aids in keeping the entire board length on the blade, it the set measurements.
3. Dado cuts – These are trench dugouts on the board meant for joinery. The cut gives way for the joiner that is going to be used. You can get dado cuts with the use of a fence or miter gauge. You can still opt for some highly specialized blades that are more efficient.

Does the number of teeth matter?

I know you must be wondering, does the number of teeth matter? Here, I would like to warn you that it is not a matter of more is better; there’s more to it. With many teeth, the cutting is slower but very smooth.

On the other hand, with fewer teeth, cutting is faster but ends up with rough cuts.

The most important thing here is to strike a balance, and a good shortcut is always to make sure that 2 – 4 teeth are always in the material being cut. In this setting, you are guaranteed fast, smooth, and easy cutting with less friction.

Blade RPM

Many woodworkers only look at the motor’s RPM and forget the blade’s RPM. Yes, blades have a recommended RPM and must be adhered to lest you end up with an inefficient table saw.

What you need to know is that the motor’s RPM should not exceed the blade’s RPM. If your cuts get burnt often, maybe you are using the wrong blade.

Blade troubleshooting guide

You will agree with me that a saw bench is the heart of a wood shop. In the same token, the blade is an integral part of the table saw. That said, you want to keep it in good condition always. But then, that’s not the case mostly. When using your table saw, here are some of the problems you may encounter as well as possible solutions.

Crooked cuts – There could be a lot of reasons why you are getting crooked cuts even when the miter is locked in position. While the problem could be with your motor or something else, the blade is the number one suspect, and the teeth for that matter.

Blade breakage – The most common problem here would be poor artistry. Maybe the pins are too weak or loose. Also, it could be the blade tension that is too high or the attacking pressure.

Tooth breakage – This occurs rarely, and one of the main reasons that break blade teeth is poor craft too. The components that join parts may be weak or loose. The tooth pitch could also be unsuitable for the material being cut.

Premature blade wear – If your blade wears out very fast, there must be a problem. The first suspect is incorrect teeth type. Maybe you are using a cross-cutting blade for rip cutting.

Factors to consider when buying table saws

So far, we have covered a lot, and all the new stuff learned might be confusing. In this segment, we want to make things clear regarding buying table saws. We want to point out the important factors you need to consider when buying table saws.

So, without further ado, let’s get down to business.

Brand – The big names matter

I always tell people to buy from these big brands; the likes of Greenworks, DEWALT, Hitachi, Makita, Craftsman, Rockwell and the rest.

What most people don’t seem to acknowledge is that for a brand like DEWALT to be crowned as an industry leader, it takes a lot of effort. Efforts geared mainly towards customer satisfaction.

I understand that some of these household names cost quite a fortune. But always remember the mantra of you get what you pay for, and seemingly, cheap is expensive. The latter is quite evident with these cheap brands.

I once bought a generic table saw, and its knob broke even before completing a simple curtain boxes project. Yes, the big brands may suffer the same fate, but at least replacement parts are available and affordable.

Another thing is regarding the warranty. Most of these cheap brands won’t honor the warranty because they have nothing to lose; they don’t even have a reputation.

However, the most significant advantage of top brands is the value for money. While DEWALT, Makita and the rest may be considered very expensive, they are worth every penny.
I have several Makita and DEWALT power tools that have served me quite well; at least three years and above on average. What these brands emphasize on is quality so with every piece, you are guaranteed the best in class performance and durability!

The dollars and the cents

Table saws vary in the budget; you can get a cheap table saw for $50 or a high-end table saw for $5000. However, then, that’s not the most important thing. What you should do is set your budget and shop within your means. This will be depending on your needs and also the use.

For a personal use table saw for the seasonal DIY enthusiasts, $300 is enough budget that can snap you a good table saw.

The question will now be, what are your specific needs?

For professional woodworkers, $500 will get you a heavy duty saw bench to handle those tough tasks efficiently. For industrial woodworking, prices differ because of some specialized features, but you will get value in something retailing from $700 upwards.

When budgeting, always makes sure to consider future needs and that said, you shouldn’t mind spending slightly out of your budget to get those unique features or higher performance to suit your future needs. Above all, remember the mantra of you get what you pay for and always, cheap is expensive.

Consider portability and workspace

As discussed, there are two types of table saws; portable and stationary. That said, it is essential to assess your working needs so that you may pick the right table saw.

If you are an on the go woodworker, consider getting a portable table saw. If you have a woodshop, then you can pick any table saw; whether portable or stationary. But then, you need to be mindful of space too.

Ideally, portable table saws are compact whereas stationary table saws are bulky. If you are running low on space, then pick a portable table saw.

What are your cutting needs?

There are a lot of factors you need to consider when assessing your cutting needs.

First, you want a table saw with the right horsepower. It is always best to go for the highest horsepower though anything between 2 HP and 5HP will still complete the job.

Also, make sure the motor is compatible with your power outlet; 110 V vs. 220 V. After that, you need to move to the blade type.

There are several blade types, so you need to pick the right blade type for the job.

I recommend you get an all-purpose blade; it covers 90% of the light to medium cutting needs. The miter gauge also needs to be firm, and the longest fences are the best.

Think about dust collection

Table saws produce a lot of dust; if you are a heavy user. For that reason, you must think about the dust collection features on board.

For a seasonal user with bench tops, dust collection shouldn’t be a problem. However, if you are running a wood shop, you understand the need of having a proper dust collection mechanism.

We have table saws that come with bags; always get the largest bag. There are others that come with ports for use with dust collectors.

This is what you should look for if you run a wood shop or you frequently use the table saw. Assess the amount of dirt you anticipate and make the right decision.

What are the safety features available?

Whether you are buying a table saw for your personal use or for business, safety is very important.

You don’t want your loved ones to injure themselves when around the equipment. For business owners, you also understand the fuss about work injuries. That said, you want to, but a table saw that has the operator’s safety in mind.

While features may vary depending on price, there are those standard must-have safety features. These include a braking system, anti-kickback, on/off switch among others. But still, you will want to use your table saw as recommended by the manufacturer.

Remember, while there are safety features, they may not guarantee you 100% protection.

Table Saw Maintenance

A lot of people have been asking a lot about the durability of table saws. The build quality does matter but then, the care you give to your table saw will determine whether it will last for six months or 5 years.

In this segment, we will share with you some of the important tips that will help keep your table saw in top condition.

  • Use the right blade for the right job. The wrong blade will give you the wrong cuts and still take a toll on the blade. The motor is also affected as it tries to compensate for the power loss caused by the wrong blade choice.
  • Clean the blade as often as possible. But remember to use the recommended cleaning agents; pitch and gum remover work best
  • Oil and lubricate all the moving parts. Do this at an interval of around 12 hours if you are a daily user. For seasonal users, always store it when oiled or lubricated. Do the same when you want to use it again.
  • Clean the tabletop area and the motor itself. Dirt is an enemy of the motor especially if it is not an enclosed one.
  • Check alignment and adjustment. The heavy vibrations may cause the parts to move and even screw to unwind. Find time to fasten these screws and bolts and align the main parts afresh.
  • Sharpen the blade regularly. If the blade shows any signs of dullness, sharpen it to give it the best cutting edge. A dull blade is slower and may damage the blade prematurely.
  • Keep the top table finish. Remember the table top threshold; smooth and dead flat. Clean the table after all sessions and when the finish looks old, consider a new polish to maintain the smooth.
  • Inspect the major parts like the belt for visual wear and tear and replace appropriately. Make sure to buy only genuine replacement parts.

Table Saw Safety Tips

Saw benches are just as dangerous as chainsaws. Though they come with several safety features, you are not 100% covered from injuries. There are several safety measures that you should undertake to keep out of harm’s way.

Here are some really helpful table saw safety tips.

  • Read the instructions manual wholly before setting out to assemble the table saw or using it. This gives you the correct information on assembly, usage, specifications and so on – don’t keep the manual in the drawer!
  • Always use the table saw for its rightful purpose and cut only the recommended materials. Misusing the table saw will not only damage it; you can also get injured.
  • Always wear safety gear whenever working on the table saw. Safety gear like goggles prevent workpieces from hitting you when they are shot up accidentally.
  • Use all the recommended safety features on the table saw. These include the blade guard and push stick. Like the manual, they are meant for use not to be stored!
  • Always wear appropriately when working on the table saw. Avoid long sleeves, ties, jewelry, and loosely fitting clothes.
  • Wear comfortable footwear that won’t slip and always stand firmly to your ground. You don’t want to slide and fall on the table when working.
  • Keep the working area clean by collecting all the dirt and wood pieces. Don’t let them accumulate around as they are likely to cause accidents.
  • Always switch off the table saw when not using it. Unplug it when changing the blades or doing any maintenance.

These are just among the many safety tips to keep you safe from harm. Make sure you follow them strictly and always keep learning about more safety tips. Join woodworking forums if possible; you will meet seasoned woodworkers, and their advice might be resourceful. But above all, keep your table saw in good working condition.

Wrapping up

A table saw is an invaluable addition to any woodworker or craftsman’s equipment store. However, this is only when you pick the best table saws for the job. There are lots of different types of table saws so make sure you get the right one.

Having read this comprehensive review of the best table saws in the market, we hope that shopping for a table saw won’t be a problem.

That said, we have come to the end of this review; if you liked it, tell us in the comments section. You can also give us your opinion regarding table saws, including personal experiences!

Leave a Reply